DTF(Direct to film) transfer.

******* This is just the DTF transfer. The shirt is not included*********

Requires a heat press due to the amount of pressure needed. Irons will not work.

It's a great way to decorate clothing, bags, hats, etc.

No refunds will be provided due to user error.

Due to the nature of our products, we do not allow refunds or exchanges.

⚡️ HOW TO APPLY YOUR DTF TRANSFER

We strongly recommend a heat press due to the amount of pressure needed.

HEAT PRESS INSTRUCTIONS:
▪️Prepare the garment by pressing it for 10 seconds on 325 degrees. This will remove any additional moisture from the garment and should not be skipped.
▪️Place the DTF transfer sheet, with the design facing you.
▪️If you are concerned about the transfer sheet will move, you can apply some heat resistant tape to secure it on the sides.
▪️Using heavy or firm pressure, press the transfer sheet for 25 seconds.
▪️Open press and allow garment to cool completely before peeling.
▪️Slowly remove the transfer sheet starting at a corner and pulling on a diagonal.
▪️Press again for 5 seconds with a Teflon sheet, butcher paper, or parchment paper on top of the design that is now on your garment. You can also reuse the transfer sheet paper, just ensure the entire image is covered before pressing.

TIPS TO CONSIDER:
If you try to lift the transfer and it's not releasing let it cool for a few seconds. Then try to lift a small corner of the film. If it still gives resistance, press it again for a few additional seconds.

If using a household iron, place it on the highest heat and make sure the steam setting is turned off. You will want to increase the time by a minute to make sure the iron gets the transfer sheet hot enough to transfer it to the garment.


Wash garments inside out for the best results and hang to dry. The excessive heat from a dryer can cause wrinkling to the transfer.